DIY Napajanje Pouzdan DC-WASHINGTON Napajanje, Korak Energije, za Auto Napajanje je DOVELO Vozim

Više informacija

Input Voltage:

DC 10-60V

Input Current:

10A Max

Static Working Current:

10mA

Output Voltage:

DC 12-60V continuously adjustable

Output Current:

10A (decreases as the voltage difference between input and output increases, please enhance heat dissipation when over 10A)

Constant Voltage Range:

DC 12-60V

Constant Current Range:

0.2-10A

Output Power:

Input voltage x 10A

Working Frequency:

150kHz

Conversion Efficiency:

92%-96%

Input Reverse Connection Protection:

No

Operating Temperature:

-40~85℃

Module Size:

85*52*21mm / 3.3*2.0*0.8in

Weight:

Approx. 78g/2.7oz

  :

Output Voltage Regulation:

Adjust the CV-ADJ potentiometer and set the output voltage to your desired voltage according to your battery or LED. Clockwise decrease,  counterclockwise increase. :

  :

Output Current Regulation:

Turn the CC-ADJ potentiometer clockwise for about 20 turns to set the output current to the minimum value and connect it to the LED, adjust CC-ADJ potentiometer to the required current. For charging the battery, connect the output after discharging the battery, then adjust the CC-ADJ to the current you need. :

  :

Package List:

1 * Step-Up Power Supply :

  :

Note:

1. The input voltage should not be lower than 10V. If the input voltage is too low, the power supply will be damaged. :

2. The input/output voltage and current must not exceed the maximum :